Guide :Home : 1500D-31S VISTA PIVOT SHOWER DOOR

Bottom rail fit on 1500D door in 28" shower stall...

Followed instructions about measuring the shower from wall to wall ABOVE the curved corners. Also subtracted the additional 9/16" before cutting on opposite side of pivot point. When the bottom rail is sitting on the flatest part of the shower lip/ledge and evenly spaced from either wall, it still seems too long. There is about a 1/8"- 1/4" gap under the rail (between the bottom of the rail and the flat shower lip/ledge surface) because the ends of the bottom rail seem to still be hitting some of the curved portion of the corners. The shower lip/ledge is flat and level (put a level on it

Research, Knowledge and Information :


VISTA-PIVOT Shower Door


VISTA-PIVOT Shower Door Series 1500D/1600D ... stall wall and fit down over the bottom track. Be sure slots in the strike jamb flange are toward the inside of shower.
Read More At : www.sterlingplumbing.com...

Standard 28-1/2 in. x 64 in. Framed Pivot Shower Door in Silver


Bring a contemporary design to your powder room by installing this STERLING Standard Framed Pivot Shower Door in Silver.
Read More At : www.homedepot.com...

36 in. Frameless Shower Door Bottom Sweep with Drip Rail in ...


36 in. Frameless Shower Door Bottom Sweep with Drip Rail in ... rail sheds water back into the shower stall; ... cut the sweep to fit your shower door’s ...
Read More At : www.homedepot.com...

Shower Door Seal | eBay


Find great deals on eBay for Shower Door Seal in Shower Doors and Stall ... Fit 1/4" Frameless Shower Door Sweep Bottom Seal Wipe Drip Rail 28" Length. Fit 1/4"-6mm ...

Clear Shower Door Bottom Sweep with Drip Rail for 3/16 Glass ...


Clear Shower Door Bottom Sweep with Drip Rail for 3/16 ... It is a bit of a pain to cut off a small portion of it to fit to your shower door size as the plastic is ...

Chrome Framed Shower Door Replacement Drip Rail with Vinyl ...


Chrome Framed Shower Door Replacement Drip Rail with Vinyl Sweep ... Chrome Framed Shower Door Replacement Bottom Deflector with Vinyl Sweep ... $28.95. Clear 7/16 ...

Sterling Plumbing: Shower Doors: Shower Doors


The Sterling Plumbing web site is the source for sliding, bypass, pivot, hinged, swing, corner, neo angle framed and frameless shower doors.
Read More At : www.sterlingplumbing.com...

Suggested Questions And Answer :


Bottom rail fit on 1500D door in 28" shower stall...


Mark, I'm having different problems with the same door. Try "filing" down the ends of the bottom rail, where it is contacting the curved corners. You might have to buy a metal file to accomplish this. Go heavy on the adhesive caulk on the underside of the bottom rail. Make sure the shower base is clean and dry. You might have to push down with your arms for several minutes to get the adhesive caulk to stick. Good luck, I have to go back to my folks this afternoon, because I can't get the door panel in w/o it scraping the top rail. Ugh.
Read More At : 1500D-31S VISTA PIVOT SHOWER DOOR...

Years ago I purchased a Kinkead Vista-Pivot Shower Door, model 1500-31, Silver. For a variety of reasons the shower didn't get built until recently. However the door opening is now 32.5 inches wide so it would appear that the existing top and bottom rails are to short. Can longer top and bottom rails be purchase to make the door fit? Or is the door itself not wide enough to fit in this opening? Thanks for your help, John


Ace Hardware sells that door and you will need to see if they can order the parts but it looka like they sell the doors 36" size so when you order you will need to order for the Sterling Plumbing 1500D-36S "Vista Pivot" Shower Door Fits Openings 31 -1/4" To 36" H 66" . Now if you have not completely finished the shower you could always make the door opening fit what you have.
Read More At : 1500D-36S "VISTA PIVOT" SHOWER DOOR...

Need to replace drip cap on bottom of door - Sterling Plumbing 1500D-31S VISTA PIVOT SHOWER DOOR


O.k. these are usually attached with a double sided tape,...you need to get something like a scraper or the like and get in between it and the door,..go slow and pry it off,...SLOWLY! once you get the old one off, you'll need to clean surfaces with a rag and rubbing alcohol,....(very important for new one to stick),.....take your time with this operation,..it doesn't look like much but trust me, i've worked on many shower doors and patience IS your best friend,....again, go slow and pay attention to ALL details.
Read More At : 1500D-31S VISTA PIVOT SHOWER DOOR...

I have a Sterling 1500D shower door, the door has rubbed against the hollow bottom seal and ruined it- I can re adjust the door, I need the part number for the hollow seal kit.


I think you will find the Sterling 1500D hollow bottom shower seal here. Shower Seals Spares
Read More At : 1500D-31S VISTA PIVOT SHOWER DOOR...

I have a Sterling 1500D Shower door and I need to replace hollow gasket at the bottom of the door. Where do I purchase this from???


It sounds like you need the sweep or seal that keeps water in the enclosure. You can buy these items, which are inexpensive and usually easy to install yourself at www.technologylk.com Technology LK carries a comprehensive range of shower door gaskets, seals and other hardware. If you have any questions about exactly what you need and how to install it, you can contact the company at [email protected]" target=_blank>[email protected] or call them at 888-663-9830.
Read More At : 1500D-31S VISTA PIVOT SHOWER DOOR...

Have a sterling 1500D-42S shower door. Need to


Sterling is an inexpensive kohler product,....go to a plumbing supply store with your #s and they'll be able to get what you need.
Read More At : 1500D-36S "VISTA PIVOT" SHOWER DOOR...

Anchor won't fit in suggested drill size


If you are not using a masonry bit then you need to increase th size to 1/4 ". The reason why is with masonry bits it will say 3/16 but you are actually making a hole 1/4" with the tip of the bit. Good luck and please rate 4 thumbs for the free answer
Read More At : 1500D-31S VISTA PIVOT SHOWER DOOR...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || diydecoridea.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0836 seconds