Guide :Home : Home

Bathtub jacuzzi (motor turns runs but nothing coming from jets)

I fill up the tub and turn on the jets, but nothing is coming out of the jets? What does this mean? Is this something that i can fix myself??Any help would be greatly appreciated.

Research, Knowledge and Information :


Hot Tub Pump Problems - HotTubWorks


... if your tub is full, and still no water runs ... to manually turn the shaft, to rule out a locked up motor, ... hot tub pump problems, hot tub pump ...
Read More At : www.hottubworks.com...

Bathtubs | Jacuzzi Baths


Bathtubs. SIZE. SHAPE. Rectangle ... Salon Spa gives you the ultimate experience of both the Whirlpool and Pure Air ® bath... with no limits. If you‘ve just run a ...
Read More At : www.jacuzzi.com...

the pump on my hot tub works but the jet's don't turn on ...


the pump on my hot tub works but the jet’s don’t turn on. ... sound coming from the motor but you don’t have ... normal however heater or jets not running. ...
Read More At : aqua-tech.ca...

5 Common Hot Tub Issues and Solutions - Swim University | The ...


Here is a list of some common hot tub issues and ... My hot tub is running, but nothing is coming ... Learn the secrets to troubleshoot a hot tub pump and motor so ...
Read More At : www.swimuniversity.com...

Why Aren't My Bathtub Jets Working? | Pro Referral


Why Aren't My Bathtub Jets Working? ... the Jacuzzi’s pump motor may be malfunctioning. 5. Pump. Several problems may exist with the pump.
Read More At : www.proreferral.com...

How to troubleshoot your JACUZZI® Whirlpool On/Off Button ...


Feb 15, 2015 · ... your JACUZZI® Whirlpool Bathtub if your pump is not coming ... Whirlpool On/Off Button-JACUZZI® Tub ... not working on hot tub jet, ...

3 Ways to Clean a Jetted Tub - wikiHow


Jun 16, 2016 · How to Clean a Jetted Tub. ... My child just bought a house with a jetted bathtub. The jets are all black and ... If the jets are exposed, the motor will ...
Read More At : www.wikihow.com...

Suggested Questions And Answer :


Bathtub jacuzzi (motor turns runs but nothing coming from jets)


Each Jet will have an adjustment many times right on the jet nozzle. Carefully try to rotate them counter clockwise to open up the jet. This assumes you can here the motor running. Phil
Read More At : Home...

Jacuzzi jets not pumping out water


I have a garden tub and some of the jets work and some do not could this still be my pump?
Read More At : Home...

Bathtub jacuzzi (motor turns on but nothing comes out of jets)


Open the the repiar panel and see if the pump is working. you may hear the motor running but not the pump.
Read More At : Home...

Jacuzzi bathtub problem


Hi gmaynardo, I'm Harvey the Master Plumber. Your question is can the switch work after it is dryed out? First, it is important to understand that none of the electrical equipment (i.e. pumps, switches, wires etc.) installed on a whirlpool of any type is designed to survive under water for any length of time. Just because it is working after drying does not mean you are home free. Corrosion, rust and electrolisis are now likely, not to forget the very real chance of electrical fire. All is not lost. I would recomend replacing al inexpensive components but the pump may be handled a little differently. Since it is the single most expensive part it would be wise to take it to a local small motor repair man for inspection. With a thumbs up from him I would be very happy. Feel free contact me again!Please give me a rating here at fixya.com before you sign offThank you, Harvey
Read More At : Home...

Just drained jacuzzi hot tub and replaced circulation pump. Went to turn back on and now nothing works. Can't lights to come on, motor on main hot tub doesn't even turn on. It flashes COOL / FLO2, but jets don't work. Tried pushing all buttons and still nothing.


Bleed pump check fuses and connections
Read More At : Home...

RapidHeat In-Line Heater U395000 [ Bathtubs and Whirlpools,: My jacuzzi tub jets run for ONLY about 5 minutes b...


You have a bad motor - when a motor overheats there is a sensor inside the motor that will shut if down so as to not damage the windings and such. once your tub has cooled down for 10 mins or so it will turn back on. the fact that you can push the button multiple times just means that you are turning the air switch on the back of the motor on/off until you get to the point where the motor has cooled down and will turn back on. if you do not push the air button after the tub shuts down and you finish your bath then when the pump cools down it will come back on because the air switch in the motor is latching i.e. it is either on or off. Since you left it in the on position the motor will come back on once the motor has cooled down.
Read More At : RapidHeat In-Line Heater U395000 [ Bathtubs and Whirlpools,...

No water coming from jets in whirlpool tub MOTOR RUNNING BUT NO WATER


Intake stainer is clogged. Remove cover plate and clean.
Read More At : 5' Jacuzzi Tub Bathtub Cetra 532 H525-969...

Hello, I have a jacuzzi jet tub and the motor will not run. We have replaced the timer and the circuit breaker as there was no power coming to the timer. The motor will still not run. There is no sound at all coming from it. The motor # is LX6500. Is there anything else we can check or do? Thank you for your help.


What you need to do is a series of tests to narrow down the problem. first place to start is with the motor. Pull the motor out and see if it will come on when you apply power to it. If it will not start when you put power to it then the motor is not good and will need to be replaced.
Read More At : EH0 / EH1 / EG9 Fuzion 6666 Corner Whirlpool with Right-Side......

Leaky pump on jetted tub


You might just need to tighten the bolts. If that doesn't fix it you can dismantle it and replace the O-ring. Be sure to lightly coat the new ring with silicone grease before installing it. A pool supply store should be able to help you with the right part.
Read More At : Home...

Hot tub jets stopped working


Yes my jacuzzi uses air on the suction side to make bubbles. you must have clogged it. how long is tube can you slide a rod in there to check if its blocked?
Read More At : Calla 6042 Bathtub - 101058-000...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || diydecoridea.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1028 seconds